IntroductionComposition: Polyether modified silicone oilAppearance: light yellow viscous liquid
E-postadress: info@standard-groups.com
Composition: Polyether modified silicone oil
Appearance: light yellow viscous liquid
Active ingredient: 100%
Solvent: None
Application range:
Can be applied to all solvent-based systems, water-based systems, light-curing systems, etc.
| Category | Specifications |
|---|---|
| Produktnamn | Leveling Agent STD-2033 |
| Chemical Type | Polyether-modified polysiloxane |
| Utseende | Clear to pale yellow liquid |
| Active Content | 100% |
| Density (25°C) | 1.01-1.03 g/cm³ |
| Viscosity (25°C) | 50-150 mPa·s |
| Solubility | Soluble in most organic solvents; dispersible in water |
| Blixtpunkt | >100°C (closed cup) |
| Property | Beskrivning |
|---|---|
| Surface Tension Reduction | Improves substrate wetting (<25 mN/m) |
| Leveling Performance | Eliminates brush marks, orange peel, and cratering |
| Compatibility | Works with waterborne, solvent-borne, and UV-curable systems |
| Thermal Stability | Stable up to 150°C |
| Foam Control | Low foam generation |
| Industry | Use Case |
|---|---|
| Industrial Coatings | Improves flow in automotive and machinery paints |
| Wood Coatings | Enhances smoothness in furniture finishes |
| Architectural Paints | Reduces surface defects in wall coatings |
| Printing Inks | Prevents pinholing and improves gloss |
| UV Coatings | Ensures uniform curing without defects |
| Advantage | Benefit |
|---|---|
| Excellent Flow | Eliminates surface imperfections |
| Wide Compatibility | Suitable for multiple resin systems |
| Low Volatility | No VOC emissions |
| Easy Incorporation | Can be added at any stage of formulation |
| Cost-Effective | Effective at 0.1-1.0% dosage |
| Parameter | Recommendation |
|---|---|
| Dosage | 0.1-1.0% of total formulation |
| Addition Point | Preferably during let-down phase |
| Mixing | Moderate stirring sufficient |
| Storage | Keep sealed at 5-30°C; shelf life: 24 months |
| Aspect | Details |
|---|---|
| Toxicity | LD50 > 2000 mg/kg (oral, rat) |
| Skin Irritation | Mild (Category 3) |
| Regulatory | Complies with REACH, FDA 21 CFR 175.300 |
| Handling | Use gloves and goggles; ensure ventilation |
| Feature | STD-2033 | Standard Leveling Agents |
|---|---|---|
| Surface Tension Reduction | Excellent (≤25 mN/m) | Moderate (30-35 mN/m) |
| Defect Elimination | Superior (no craters/streaks) | Partial improvement |
| Compatibility | Broad (water/solvent/UV) | Limited to specific systems |
References
Product Technical Data Sheet (2024)
Journal of Coatings Technology – “Advances in Surface Modifiers” (2023)
Ansvarsfriskrivning: Ovanstående innehåll är endast för referens och kommunikation mellan branschinsider, och garanterar inte dess riktighet eller fullständighet. Enligt gällande lagar och förordningar och förordningar på denna webbplats ska enheter eller individer som köper relaterade artiklar erhålla giltiga kvalifikationer och kvalifikationsvillkor.
Företagstelefon
+86-21-6420 0566
Arbetstider
måndag till fredag
Mobiltelefon:
13816217984
E-post:
info@qinsun-lab.com
