IntroductionComposition: Polyether modified silicone oilAppearance: light yellow viscous liquid
E-postadress: info@standard-groups.com
Composition: Polyether modified silicone oil
Appearance: light yellow viscous liquid
Active ingredient: 100%
Solvent: None
Application range:
Can be applied to all solvent-based systems, water-soluble systems and light-curing systems, etc.
Leveling Agent STD-236N Technical Data Sheet
| Category | Specifications |
|---|---|
| Produktnamn | Leveling Agent STD-236N |
| Chemical Type | Polyacrylate copolymer |
| Utseende | Clear yellowish liquid |
| Active Content | 50±2% |
| Solvent | Propylene glycol methyl ether |
| Density (25°C) | 1.02-1.05 g/cm³ |
| Viscosity (25°C) | 200-400 mPa·s |
| Blixtpunkt | 38°C (PM) |
Key Performance | Characteristics |
|---|---|
| Surface Tension | 24-26 mN/m (0.1% solution) |
| Compatibility | Water/solvent/UV systems |
| Thermal Stability | Stable to 180°C |
| Defect Control | Eliminates craters/orange peel |
| Foam Character | Low foam generation |
| Applications | Recommended Use |
|---|---|
| Automotive OEM | High-gloss topcoats |
| Wood Coatings | Furniture finishes |
| Industrial Paints | Machinery coatings |
| UV-Curable Systems | Electronic coatings |
| Printing Inks | Lithographic inks |
Performance Advantages | Benefits |
|---|---|
| Superior Flow | Eliminates brush marks |
| Substrate Wetting | Excellent on metals/plastics |
| Gloss Enhancement | 20-30% improvement |
| Dosage Efficiency | Effective at 0.2-1.0% |
| Storage Stability | 18 months @25°C |
Usage Guidelines | Recommendations |
|---|---|
| Optimal Dosage | 0.3-0.8% by weight |
| Addition Point | Let-down phase |
| Mixing | Moderate agitation |
| Storage Temp | 5-35°C |
| Shelf Life | 24 months |
Safety & Compliance | Standards |
|---|---|
| Blixtpunkt | 38°C (PM) |
| VOC Content | 420 g/L |
| Regulatory Status | REACH compliant |
| GHS Classification | Not hazardous |
| PPE Requirements | Safety glasses |
Technical Comparison | STD-236N | Silicone Alternatives |
|---|---|---|
| Surface Smoothness | Excellent | Good |
| Recoatability | No issues | Potential problems |
| Foam Tendency | Low | Moderate-high |
| Cost Efficiency | 30% better | Standard |
| Yellowing | None | Possible |
References:
Product Technical Bulletin (2024Q3)
European Coatings Journal – “Advances in Leveling Technology” (2023)
Ansvarsfriskrivning: Ovanstående innehåll är endast för referens och kommunikation mellan branschinsider, och garanterar inte dess riktighet eller fullständighet. Enligt gällande lagar och förordningar och förordningar på denna webbplats ska enheter eller individer som köper relaterade artiklar erhålla giltiga kvalifikationer och kvalifikationsvillkor.
Företagstelefon
+86-21-6420 0566
Arbetstider
måndag till fredag
Mobiltelefon:
13816217984
E-post:
info@qinsun-lab.com
