IntroductionAcrylic polyol resin MT-7152-80 is a hydroxyl-functional polymer designed for high-
E-postadress: info@standard-groups.com
Acrylic polyol resin MT-7152-80 is a hydroxyl-functional polymer designed for high-performance coating systems. This article presents key technical data through structured tables covering its properties, formulation guidelines, curing characteristics, and application performance.
| Property | Specifikation | Test Method |
|---|---|---|
| Solid Content | 80±2% | ISO 3251 |
| Hydroxyl Value (mg KOH/g) | 120±5 | ASTM D4274 |
| Viscosity (25°C, mPa·s) | 3000-6000 | Brookfield RV, spindle 3 |
| Acid Value (mg KOH/g) | ≤5 | ASTM D4662 |
| Color (Gardner) | ≤2 | ASTM D1544 |
| Solvent System | Xylene/Butyl Acetate | GC Analysis |
| Curing Agent Type | NCO:OH Ratio | Dry Time (25°C) | Pencil Hardness | Flexibility |
|---|---|---|---|---|
| HDI Trimer | 1.1:1 | 4h tack-free | 2H | Pass 1mm mandrel |
| IPDI Trimer | 1.0:1 | 6h tack-free | 3H | Pass 2mm mandrel |
| TDI Adduct | 1.2:1 | 2h tack-free | H | Pass 3mm mandrel |
| Component | Automotive Refinish (%) | Industrial Coatings (%) | Plastic Coatings (%) |
|---|---|---|---|
| MT-7152-80 | 60-70 | 50-60 | 40-50 |
| Curing Agent | 20-25 | 15-20 | 10-15 |
| Additives | 2-3 | 3-5 | 2-4 |
| Solvents | 5-15 | 15-25 | 30-40 |
| Pigments | 0-10 | 5-20 | 5-15 |
| Property | Test Method | Typical Result |
|---|---|---|
| Gloss (60°) | ASTM D523 | ≥90 |
| Adhesion (Cross-cut) | ISO 2409 | 0-1 |
| Impact Resistance | ASTM D2794 | 50kg·cm direct |
| Chemical Resistance | MEK Double Rubs | ≥200 |
| Weather Resistance | QUV-B 1000h | ΔE<2.0 |
Excellent UV durability and color retention
Balanced hardness/flexibility for multi-substrate adhesion
Good compatibility with most polyisocyanate crosslinkers
Suitable for high-solids formulations (up to 70% NV)
Automotive OEM and refinish coatings
Industrial maintenance paints
Plastic component coatings
High-end decorative finishes
Optimal application viscosity: 80-120 sec (DIN4 cup)
Recommended cure schedule: 20min@80°C or 7d@25°C
Pot life (mixed): 4-6 hours at 25°C
Ansvarsfriskrivning: Ovanstående innehåll är endast för referens och kommunikation mellan branschinsider, och garanterar inte dess riktighet eller fullständighet. Enligt gällande lagar och förordningar och förordningar på denna webbplats ska enheter eller individer som köper relaterade artiklar erhålla giltiga kvalifikationer och kvalifikationsvillkor.
Företagstelefon
+86-21-6420 0566
Arbetstider
måndag till fredag
Mobiltelefon:
13816217984
E-post:
info@qinsun-lab.com
