IntroductionHydrophilic aliphatic polyisocyanate MT 307/1 is a water-dispersible crosslinking a
E-postadress: info@standard-groups.com
Hydrophilic aliphatic polyisocyanate MT 307/1 is a water-dispersible crosslinking agent specifically designed for aqueous coating systems. This modified polyisocyanate combines excellent weathering stability with enhanced water compatibility, making it particularly suitable for environmentally friendly coating formulations.
| Property | Specifikation | Test Method |
|---|---|---|
| Utseende | Clear, pale yellow liquid | Visual inspection |
| NCO content (%) | 12.5±0.5 | ASTM D2572 |
| Viscosity (25°C, mPa·s) | 3000±500 | Brookfield RV |
| Density (20°C, g/cm³) | 1.10±0.02 | ISO 2811 |
| Flash point (°C) | >100 | ISO 2719 |
| Solubility in water | Dispersible | Manual evaluation |
| Resin Type | Compatibility | Pot Life (h, 25°C) | Recommended NCO:OH Ratio |
|---|---|---|---|
| Acrylic polyol dispersion | Excellent | 4-6 | 1.2-1.5:1 |
| Polyester polyol dispersion | Good | 3-5 | 1.3-1.6:1 |
| Polyurethane dispersion | Excellent | 5-7 | 1.1-1.4:1 |
| Alkyd emulsion | Limited | 2-3 | 1.5-1.8:1 |
| Component | Wood Coating (%) | Industrial Coating (%) | Automotive Refinish (%) |
|---|---|---|---|
| Hydroxyl component | 60-70 | 55-65 | 50-60 |
| MT 307/1 | 10-15 | 8-12 | 12-18 |
| Co-solvent | 3-5 | 2-4 | 4-6 |
| Additives | 1-2 | 1-2 | 1-2 |
| Water | 15-25 | 20-30 | 20-25 |
| Property | Test Method | Typical Value |
|---|---|---|
| Pendulum hardness (s) | ISO 1522 | 120-150 |
| Cross-cut adhesion | ISO 2409 | 0-1 |
| Flexibility (conical mandrel) | ASTM D522 | Pass 4mm |
| MEK resistance (double rubs) | ASTM D5402 | >200 |
| Water resistance (240h) | ISO 2812-2 | No change |
| Weather resistance (QUV-B 1000h) | ASTM G154 | ΔE<2.5 |
Excellent water dispersibility without emulsifiers
Low viscosity for easy processing
Superior yellowing resistance
Good mechanical-chemical property balance
Compatible with various aqueous resin systems
Waterborne wood coatings
Eco-friendly industrial finishes
Automotive refinish systems
Plastic coatings
High-performance DIY coatings
Optimal application temperature: 15-30°C
Recommended curing: 30min@80°C or 7d@25°C
Storage stability: 6 months in original container
Requires mechanical stirring for water dispersion
Ansvarsfriskrivning: Ovanstående innehåll är endast för referens och kommunikation mellan branschinsider, och garanterar inte dess riktighet eller fullständighet. Enligt gällande lagar och förordningar och förordningar på denna webbplats ska enheter eller individer som köper relaterade artiklar erhålla giltiga kvalifikationer och kvalifikationsvillkor.
Företagstelefon
+86-21-6420 0566
Arbetstider
måndag till fredag
Mobiltelefon:
13816217984
E-post:
info@qinsun-lab.com
